Project Comanche - Introduction
[an error occurred while processing this directive] Short Cuts

4x4Wire | JeepWire | Intro | Gallery | Projects | Library | Tech | Jeep Forums

Project Introduction | Tuff Country Suspension | Sway Bar Discos | Posilok |
Fender Flares | Fixed Yoke Kit | Gearing and Locker | Armor

by: Harry Wagner

A built trail rig is great for weekends on the Rubicon, but it is not always the most practical vehicle. My personal ride, an '86 Toyota pickup, has a 4 foot long bed that is chest high, making it difficult to transport anything large or heavy. Worst of all, the truck is often undergoing modifications and not road worthy. Trips to the junkyard, volunteer work for the Forest Service, and trips to nearby Lake Tahoe all require a dependable vehicle that is more practical than my Toyota.

That is where my 1987 Jeep Comanche pickup comes in. It is equipped with a 200,00 mile 4.0L motor (complete with leaking rear main seal), AX-15 transmission, and NP231 transfer case. The axles are a high pinion Dana 30 in front and the much coveted “metric ton” Dana 44 in the rear. With the exception of some cooling problems, the Comanche has served me well as a daily driver, parts runner, and mild wheeler for years. “So why spend money on modifications?” you may be wondering. “Why not leave well enough alone?”

The Comanche is ready for a new lease on life.

Unfortunately the trails travelled for Forest Service work and snowy roads to Tahoe have taken their toll on the Comanche. Open diffs with pitiful 3.08 gearing, low ground clearance, and stock bumpers (or what is left of them) have all become limitations. Mild, thoughtful modifications are needed in order to provide more capabilities without falling into the trap of building a single purpose trail rig.

The plan is to add enough suspension lift to fit 33” tires, with ride quality taking precedent over suspension travel. Regear the differentials to 4.10 to account for the larger tires and add selectable lockers for better traction on the trail and in the snow without any quirky handling. A fresh 4.0L motor and stronger NV3500 transmission will be installed, giving the Comanche a new heart and ensuring that it will provide several more years of trouble free service. Finally new paint will be added and protected with trail armor on the front, sides, and rear that will also provide solid extraction and jacking points.

So whether your single seater tube buggy doesn't have enough room for a sleeping bag or your wheeling rig also has to deliver you to work on Monday morning, follow along as we transform a stock Comanche into a vehicle suited for any situation.

Related Information:

Trending on 4x4Wire TrailTalk Forums

New Topics on TrailTalk
Need center console insert for Dodge Raider
by red1987raider - 09/17/22 09:34 PM
Help me with my mess of vacuum lines
by Colombia - 09/15/22 02:52 AM
Recent Posts on TrailTalk
Help me with my mess of vacuum lines
by rxinhed - 09/21/22 03:54 AM
Need center console insert for Dodge Raider
by rxinhed - 09/21/22 03:50 AM

4x4Wire Social:

| 4x4Wire on FaceBook

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.