Project: DIY Gas-tank skidplate
http://www.4x4wire.com/mitsubishi/projects/tank_skid/ Short Cuts
[Main Page | Projects | Reviews | Tech | Gallery | Forums | Mitsu Mailing List | Trails | Links ]

Photographer/Designer: Dave Philips | Author/Editor: Phil Hansford August 1, 2001

Dave's drawing details the measurements of the new skidplate
Dave is no longer worried about making his tank "smaller" on the trail

Dave Philips, AKA "Mudmaster", wanted a skidplate that wouldn't bend under the weight of his truck while hitting the trails around Virginia, North Carolina and other areas. Dave's Raider is an 87 2.6l, so it would be wise to double-check your measurements if you are driving the V6 version. This was made for the SWB platform.

To build Mudmaster's skidplate, you need some 3/16" steel, a length of 1" angle iron, and a little welding proficiency. Dave's drawing provides all the necessary measurements to make the skid. Dave originally made the armour to fit over the stock piece, but he plans to adjust the height of the front and back sections to tighten up the tolerances after removing the old plate. This will result in a lower profile tank.

Caution: Whenever welding near a gastank, always do a thorough precheck to ensure that the tank is not leaking. Also keep an appropriate fire extinguisher on hand, just in case.



Contacts: Related Links:


Trending on 4x4Wire TrailTalk Forums

New Topics on TrailTalk
Gen 2 UCA extended upper ball joints?
by Colombia - 05/24/22 03:28 AM
Blown Head Gasket - could use advice
by Runner-Man - 05/23/22 01:58 AM
Florida Mitsubishi 4X4 Fall Crawl 2022
by Mudraider - 05/16/22 04:50 PM
RPM's fluctuate when turn signals/lights are on.
by LarryJo - 04/30/22 04:40 PM
FS: 500,000 mile 2003 Toyota Sequoia SR5 4X4
by atikovi - 04/29/22 03:56 AM
Check Engine Light Throttle Position Sensor:
by nvmonty - 04/28/22 04:34 AM
Recent Posts on TrailTalk
Gen 2 UCA extended upper ball joints?
by Colombia - 05/24/22 03:28 AM
Blown Head Gasket - could use advice
by Runner-Man - 05/23/22 01:58 AM
Florida Mitsubishi 4X4 Fall Crawl 2022
by Mudraider - 05/16/22 04:50 PM
OG folks chime in!
by OldColt - 05/10/22 10:55 PM
RPM's fluctuate when turn signals/lights are on.
by Mudraider - 05/08/22 01:17 AM
the cold start shuffle got me
by Mudraider - 05/03/22 07:20 PM







4x4Wire Social:

| 4x4Wire on FaceBook


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.